Prosthetics
Components
Healing collar
OsteoCare™ Healing Collars are perfectly designed for contouring the soft tissue following second stage re-entry of osseointegrated implants. The collars are used to block the internal hex and thread of the implant during healing preventing soft tissue or bone from growing into this area. They ensure a symmetrical moulding of the peri-implant mucosa due to a favourable attachment of the soft tissue to the machine-polished surface.
Impression Transfer
Impression Transfer is a two-piece component comprising of a retaining screw and impression sleeve and designed for an implant-level impression using the open or closed tray indirect impression technique.
Implant Replica
Implant Replica is used to replicate the corresponding internal hexagon of the implant positioned in the mouth, enabling the implant fixture level to be accurately transferred by the technician to the master model. The replica is also available with a ball for use with OsteoCare™ ball type implants.
Peek Transfer Abutment
Temporary Impression Peek Abutment is designed for an implant-level impression using the closed tray impression method. The abutment is used to replicate the internal hexagon of the implant fixture level in the mouth and accurately transfer it to the master model.
Screw Retained Abutment
Screw Retained Abutment is used to connect single or multi-unit restorations to the implant, such as fixed crowns or bridges.
One-Piece and Screw Retained Ball Attachment
Ball Attachment is designed to retain an overdenture to implants placed at angles from 0° to 45°. The one-piece component is used to accommodate implant angulations from 0° to 15° with the two-piece (SRBA) already angulated from 15° to 45°.
Direct Cast Abutment (For Lab use Only)
Direct Cast Abutment (DCA) is used for the fabrication of custom made abutments and screw-retained restorations, using a wax-up and cast-on technique to facilitate the fabrication of screw-retained prosthesis. The DCA is also available with a gold interface for precise implant abutment connection. The DCA is made of Delrin, which is a plastic that will burn out whilst leaving no residue within the matrix. It can be cut to the exact length and wax added to the required dimension, whether it is for a Crown, Bridge or Overdenture.
Polycarbonate 'O' Ring Housing
Used with OsteoCare's Ball Type implants to stabilise dentures.
