You are here: Home Professionals Surgical Instruments Surgical Kit


    The Surgical Kit contains all instrumentation required for the placement of Mini, Midi & the Maxi Z range. Its simple layout benefits the clinician from an economic and organisational aspect.


    Components of the OsteoCare™ Surgical Kit

    Available instruments Usage
    Ultra Pilot Drill 1.30mm long Osteotomy preparation for Mini, Midi, Maxi Z Implants
    Osteotomy Bur 2.20mm Pilot osteotomy preparation
    Osteotomy Bur 2.75mm Sequential drilling
    Trial Abutments Determines abutment angulations
    Bur Cleaner Cleans the internal irrigation hole
    Ratchet Compatible with all OsteoCare™ implant drivers
    Torque Wrench 30N/cm Checking implant initial stability and torquing Abutment Screws
    Osteotomy Probe Measurement of the osteotomy socket
    Tweezers Handling of the implant
    Over Hex Driver 1.9mm Short Placement of Mini Implants Ø2.35 – 2.80mm
    Over Hex Driver 1.9mm Long Placement of Mini Implants Ø2.35 – 2.80mm
    Over Hex Driver 2.4mm Short Placement of Midi Implants Ø3.30 – 4.30mm and all Maxi Z One-Piece Implants
    Over Hex Driver 2.4mm Long Placement of Midi Implants Ø3.30 – 4.30mm and all Maxi Z One-Piece Implants
    Ratchet Connected Hex Driver 1.5mm Tighten Screw Retained Components and Healing Collars
    Ratchet Connected Hex Driver 2.2mm short Placement of all OsteoCare™ two-piece implants
    Ratchet Connected Hex Driver 2.2mm long Placement of all OsteoCare™ two-piece implants
    Ratchet Connected Hex Driver 2.2mm extra long Placement of all OsteoCare™ two-piece implants